Taputapu Whakamātautau X-Ray Mō Kai (Tūwaka FA-XIS) me Te Tāwhai Hiko me Te Whakakore

Ko te Pūnaha Arotake Mātai Ihi-ira Anamata (FA-XIS Tuarā), i whanaketia e Tianjin ENAK Automation Equipment Co., Ltd., he taputapu arotake mātai-mōrearea mō te tirotiro haumaru kai. Ko te huinga o te hangarau anamata X-ray matua hoki me te tinihanga iti iti i te paraihe, e whai wāhi ana ki te kimi paku katoa mō ngā kamupene hui kai kia tutuki ai ngā paerewa haumaru kai o te ao.

Tiro ā-mutunga o te kaihono

Ko tēnei taputapu whakamātautau e whakauru ana i ngā tauira rima (FA-XIS3012 ki FA-XIS8030) hei āwhina i ngā wāhanga huarahi rerekē, mai i te tukatuka kai itinga iti ki te tukanga kai kikii nui. He tino pai mō ngā kai pakia me ngā kai kore pakitara, e tūhura ana i ngā mea kore hua kei roto i ngā pakitara piriti, kārihi, metara, me te paraihe, ina hoki kāore e pa ana te mātai o te kai, te inu para, i te wāhi noho ranei.

Te Mahi o te Pūkaha

I te whakaurunga VJT X-ray me ngā taiapa DT, ka tiakina e te punaha te putanga irahiko tūmau me te whakaahua kounga teitei. E tautokona ana i ngā mema 100 mō ngā paramita tiro whakamātautau kai, e āwhina ana i te panonitanga tere i waenganui i ngā momo kai rerekē. Ki te rarangi tiaki IP66 me te hanga SUS304 paraihe koretake, e pakari ana ki te matepō me te horoi kiripaku teitei, e ōrite ana ki ngā taiao tukanga kai pīroiroi.

Te Tāpihi Metara Mataara Rawa mō ngā Whakamahinga Kai

He taputapu whakamātautau matua mō te haumaru kai, ko te Karatia FA-XIS e whai ana i te āhua o te arataki ki ngā here rite kai. Ka taea e ia te kitea i ngā pāmu iti rawa atu o te mētara—pērā i ngā pōro SUS304 iti 0.3mm me ngā aho mētara 0.2×2mm—ngā parahaka e huna ana kei te huringa kai (hei tauira, ngā kirikiri mētara mai i te warewarenga o te wīwī i ngā rārangi bākerei, neke atu rānei i ngā tohu parāoa i te huringa kiko). Ko te taumata nei o te maro ake ka whakarite kia whai tikanga ki ngā ture marino pērā i te FDA me EU 178/2002, ka aukati i ngā hua kua pakaru kia eke ki ngā kaiwhilhui. Arataki i ngā kāmera mētara tawhito, ka pupuri i te tika mā te katoa o ngā momo pūpahi (pene, kiri mētara, ipu kōhatu), ā, anō hoki ki ngā ahua kai (maroke, rango, nui te tinihangia), me ngā karanga hapa e iti ake i te 0.05% hei aukati i te whakaroa i te huringa tere.

Taputapu Tāwhai Aunoa hei Pāwhara i ngā Hua Kua Pakaru

Ko te punaha whakakore aunoa ki te kawenga o tēnei taputapu whakamātautau e tu ana hei aarai kāore he kōrero mō ngā hua kino. Ki te maha o ngā kōwhiringa whakakore (kiri tu, kiri totohu, pūpahi hau, me era atu), e uru ana ki ngā momo kai maha: ngā pūhiko hau mō ngā taonga maroke pērā i ngā paraka rama rama, ngā kiri totohe kaha mō ngā hua kete, me ngā kiri tu mō ngā kai paku. Ka whakahohehia ia 0.3 hēkona i te wā e kitea ana ngā taonga pouri, ka pai ake i te āhua ā-ringa—he mea matua nui mō ngā raina e rere ana ki te 70m/min (FA-XIS3012/4016). Hei tauira, i runga i te raina huawhenua kua rīwai e whakamahia ana te FA-XIS5025, ka wehea e te punaha te 100% o ngā tahumaero me ngā kapi rama 1.5mm, ka whakakorehia ngā tūkinotanga herehere e taea ai te utu i ngā miriona tāra. Ko ngā kārito he mea hanga i te SUS304 kai-tikanga, ā, ko ngā mata maeneene e aukati ai i te hui haunga o ngā hua me te pouri tuarua.

Te Ripoata Aunoa mō te Arataki & Whakahaere Kai

Tautoko tēnei taputapu whakamātautau i te arataki raraunga inaia ki te mutunga, he mea matua nui mō te whakahaere kounga kai o nāianei. Ka rehita aunoa i ngā raraunga tirotiro (wātā, pūkoro hua, momo pouri, ID kaitirotiro) ka rokiroki tonu ana i ngā pūrua hua e 100 mō te tango haumaru. Ka taea te whakahoki i ngā raraunga tru USB, ā, ka taea hoki te tukutuku atu ki ngā punaha ERP/MES tru Ethernet, e whakarato ana i te tirotiro kounga mōrearea wā. Mēnā he take haumaru, ka taea e ngā kamupene te whai i ngā pūkoro paingia i roto i ngā meneti—hei tauira, mēnā ka ripoata tētahi hokohoko i te pouri metara ki roto i tētahi pūkoro taro, ka tohua e ngā rehita o te FA-XIS Series te huinga whakangao me te raina takotoranga, ka whakapoto ai ngā whakauru ki ngā pūkoro iti noa i te taonga katoa. Ko ngā raraunga anō hoki e āwhina ana i te tirotiro kounga ā-ipurangi: ko te tātai i ngā ara (hei tauira, te kitea marino i ngā haruru ki te raina kai pāpaku) e āwhina ana i te kitea me te whakatika i ngā take pū, pērā i ngā wāhi kirihou tupeka, ka heke iho ai ngā raru pouri i te wā roa.

Te Kōwhiringa Mātai Kai-Mātai me te Hangarongo Tūponotia

Ko ia wāhanga o te taputapu whakamātauranga e arataki ana ki ngā tīmataka haumaru kai. Ko te takotoranga me te karuwha he totohu mātātoko SUS304, e āki ai te pānga o ngā huinga whakakaha ranei me te whakaeke i ngā here whakapiri kai a te FDA. Ka torongaia te totohu mātātoko ki te toronga tuatoru (kōhatu, kōpae, whakamutunga ataahua), ka eke ki te itinga mata Ra≤0.4μm—ka aukati i te herekenga o ngā parawhiti kai, ā, ka taea te horoi i te māma. Ko te arai-hiko puhipuhi karekau he huruhuru, he kore-mā, he pakari ki te wareware, ā, e whai whakaaititanga ana ki ngā tikanga whakapiri kai EU 10/2011, ka whakarite kia kore ai te rere o ngā mea kino ahakoa ki te 80℃. Ko ngā wāhanga matua pērā i ngā rori kawe kai ka hangaia mā te CNC turning, ko te taurangi āhuahanga kei roto i te ±0.05mm, ka whakarite mō te mahi āhua o te arai, ā, ka aukati i ngā hapa ina whakatūkarohia e te titaha.

Whakaurunga & Tika Rerekētanga o ngā Wāhanga Matua

Ko te mahi a te taputapu whakamātautau e noho ana ki ngā wae kua hounga mai i te ao: ko ngā kāwhiti VJT X-ray (US) mō te putanga pūhi, ko ngā taiapa DT (Hininiha) mō te whakaahua tikangia teitei, me ngā wae rerehua a Schneider (Iruni) mō te whakahaere hiko kua āhua. I te wā o te huihuinga, ka arataki ngā kaimahi ki ngā tikanga ISO 9001—ko ia hononga wiri ka tāpia kia tika te pōturi, ka tapaia hoki, ā, ka pakaru te kāwhiti X-ray ki ngā paki IP66 kia pehia te toka/te wai. Muri i te huihuinga, ko te prosihia whakarerekē 120-hāora hei whakarātaka i te angamaheni: ka whakamātau ngā mātanga i te 50+ tauira kai (mokowhito, makraka, pūwaihanga) i runga i ia tauira, ka whakarerekē i te uara itepeka/hiko o te X-ray kia pai ai te takotoranga. Mō te FA-XIS8030 (te awa 800×300mm), ko te whakarerekē e taraiwa ana ki te wehenga kotahi o te pūhi kia kitea ai ngā waewae 0.3mm SUS304 tae noa ki ngā tapa o te awa, ka whakarātaka kia kaua he wāhi kore-ātaahua.

Hoahoa Pūtahitahi me te Hoahoa Tino Arataki

Ko te hauā me te whaiwāhitanga e noho ana ki te hoahoa o te taputapu whakamātau. Ka taea te horoi i te pōroto ki te pēhi toka (100bar) nā te raupapa IP66—he mea matua herekia mō ngā whare miraka, mīti rānei e here ana te whakakaha kia pakaru ia rā. Ko te arai ake o te taiepa he hoahoa tūmatanui kore taputapu, ka taea te wehewehe katoa i roto i ngā miniti 5 mō te horoi tino pono. Mō te āhuatanga mataara, ko te paparorohiko 17-ingoika e ākiia ana i te 15° kia kitea pai ai, ā, ka taea te whakaroa i waenganui i te 700-950mm kia tika mō ngā kaitūhono katoa. Ko ngā pātene whakahaere he pango māmārururu, ā, he tae (karaka mō te tiimata, whero mō te mutunga tūmatanui), ka iti ake ngā hapa whakahaere. Ko te punaha tāpiripiri whakakore ka taea te whakakapi i te wāhi i roto i ngā miniti 30, ka iti ake te wā kore mahi—he mea matua nui mō ngā raina whakaputa 24/7.

P1: E taea e te taputapu whakamātau FA-XIS Series te kite i ngā parahara kore-metara pērā i ngā kōhatu, ngā kirihou rānei i ngā katoa momo kai?

A1: Ae. Ka kitea e te rārangi ngā pōro hiriwa/mātāpuna 1.0-1.5mm me ngā kōhatu i runga i te nuinga o ngā kai. Mō ngā hua iti te nekeneke (hei tauira, taro, paraihe), ka wehewehe te whakaahua X-ray mataara i ngā taupua 1.0mm; mō ngā hua nui te nekeneke (hei tauira, mīti kawhiti), ka whakarato te mana X-ray 350-480W (FA-XIS6030/8030) i te wehenga engari ka pupuri i te maru. Tuhipoka: E kore e taea te tātari i ngā taupua iti te nekeneke (nylon, makawe) nā te ōrite te nekeneke ki te kai—e tukuna ana e mātou ngā wāhi kōpae mō ēnei hiahia.

Q2: Me pēhea taku whiriwhiri i te tauira tika (hei tauira, FA-XIS4016 konatū FA-XIS6030) mō taku rārangi huarahi?

A2: Tīpakia mā te whai mātua i ēnei 3 āhuatanga: 1) Te rahi o te hua: FA-XIS4016 (te tūnela 400×160mm) mō ngā mea iti (pūkeko kai piko), FA-XIS6030 (600×300mm) mō ngā hua nui ake (5kg pepa paru). 2) Te tere o te rārangi: FA-XIS3012/4016 (10-70m/min) mō ngā rārangi tere tino (kai penehi), FA-XIS5025-8030 (10-40m/min) mō ngā hua nui (huarākau tio). 3) Te kapata o te tārai: FA-XIS8030 (50kg) mō ngā mea taumaha (tinana tuna), FA-XIS3012 (5kg) mō ngā mea mama (kapu rīwai). Ka taea hoki e tā tātou timatanga te whakamātau i te rārangi ki te wāhi e tohutohu ai i te tauira pai rawa.

Q3: Arataki ana te taputapu whakamātautau ki ngā tīmeti haumaru irirangi o te ao?

A3: Āe tāwaho. Ka ū ki ngā tīmata reihe i EN 61010-02-091 (EU), CFR 21 Part 1020 (US), me GB 18871 (Haina). Ko te tere tohatoha āhuarangi o te mata he <0.5μSv/h—tērā pea i raro ake i te tīmate haumaru o te ao 2.5μSv/h. Ngā āhua haumaru: 1) Pūnaha whakamaru: ka mutu te reihe-X mēnā ka wātea te takotoranga karuwha. 2) Pātohu whakamutunga tūmatanui: ka tapahia te hiko ki ngā waahanga katoa i roto i te 0.1 hēkona. 3) Rama whakatūpato reihe: ka whakapau atu kia mōhiotia e ngā kaitūhono te whakamahi reihe-X. E tuku ana hoki mātou i te whakangungu haumaru reihe me te whakamātau whai mātai i ia tau.

Q4: Ka taea te hono i ngā raraunga o te taputapu whakamātauranga ki tā mātou pūnaha ERP e noho ana?

A4: Ae. Tāwhaiwhai ana te pūnaha i te whakawhitinga kōrero Ethernet me RS232, e āki ai te hononga māmā ki ngā pūnaha SAP, Oracle, i te ERP/MES ritenga. Mā te rōpū hangarau tātou e tuku ana i te API documentation me te tautoko takotoranga hei tautuhi i te whakauru raraunga—ngā hua arotake (paingia/ngaro, momo kirihou) ka tukuna aunoa ki tō ERP i te wā poto. Ka wehe tēnei i te whakauru raraunga ā-ringa, ka iti ake ngā hapa, ka hāungia ake hoki ngā arotake kounga (hei tauira, e tuku ana i ngā raraunga hītori ki ngā kaimātai FDA i ngā meneti).

Mēnā kei te rapu koe i tētahi raihana takitahi mō ngā taputapu whakamātautau mō ō hiahia haumaru kai—ahakoa me tūhono koe ki te arataki i ngā pāmuatanga iti rawa ki te kai mō ngā tamariki (FA-XIS3012) i ngā pakete rahi rawa (FA-XIS8030)—kua tū ake mātou ki te āwhina. Tukuna tō ingoa kamupene, ingoa whakapā, tau waea, me ngā herekore matua (momo hua, tere o te raina, ngā arataki pāmuatanga), ka whakautu tō mātou timatanga hokohoko i roto i ngā haora 24. Ka tuku mātou i ngā whakarāpopototanga tauira, ngā whakarahinga tohu ki te wāhi, me ngā utu takitahi kia noho tika ai te Rārangi FA-XIS ki ō whāinga whakangao hua me ngā paerewa haumaru kai.